Available Species:

Afrormosia

Albizzia

Brazilian Rosewood

Burmese Teak

Bubinga

Caboreiba

Celtis

Danta

Doussie

Iroko

Izombe

Mutenye

Okan

Ovangkol

Padauk

Panga Panga

Sapele

Tali

Wenge

Zebrawood

Lengths: Custom to 17'

Standard Lengths = 90”

Custom Lengths Available

All molding is shipped unfinished and sanded ready to be finished on site to match flooring finish.

Application - Commonly used in doorways to join two wood floors in adjoining rooms. Also recommended when making a transition from a wood floor to another floor that is approximately the same height such as ceramic tile. T-moldings are also used to provide expansion joints when a floor dimension exceeds 40 feet.

Installation

 - Artistic Finishes manufactures one T-Molding to fit floors ranging from 1/4 inch in thickness up to 3/4 inch.

When installing T-Moldings, it is important not to obstruct the space for expansion or contraction recommended by the flooring manufacturers. For this reason, you will need a space between the two adjoining floors of approximately 1 1/4 inches to properly install the T-Molding.
Installing T-Molding between a wood floor and another floor of the same height

- Lay the T-Molding in place to determine proper fit. To attach the T-Molding between a ceramic tile floor and hardwood floor, apply a 1/4 inch bead of construction adhesive to the top edge of the ceramic tile. Seat the molding in place, making sure that you have a minimum of a 1/4 inch molding overlap on the wood flooring, including an expansion space between the T-Molding and the wood floor to handle expansion or contraction 

Installing T-Molding between two wood floors of the same height - Lay the T-Molding in place to determine proper fit. To attach the T-Molding between two hardwood floors, apply a 1/4 inch bead of construction adhesive to the top edge on one side of the hardwood floor. Seat the molding in place, making sure that you have a minimum of a 1/4 inch molding overlap on the wood flooring on the adjacent floor. Check to make sure that you have also provided an expansion space between the T-Molding and the wood floor to handle expansion or contraction