Unfinished, standard size grilles in Afrormosia, Albizzia, Brazilian Rosewood, Bubinga, Burmese Teak,  Celtis, Caboreiba, Danta, Doussie, Iroko, Izombe, Mutenye, Okan, Ovangkol, Padouk, Panga Panga, Sapele, Tali, Wenge, and Zebrawood are available from Brenco Exotic Woods. Supply and Return air grilles are available in Flush w/ Frame, Self Rim, Flush Mount, and Flush Rim styles. Please refer to individual styles for standard size and style options. Custom sizes and thicknesses are available upon request. Vents are pre-sanded and ready for on-site finishing; no additional preparation is required.

Flush Mount grilles are used with hardwood floors as independent inserts (without frame) that rest on top of the sub floor and sit flush with the finished floor. These units are primarily used for new hardwood floor installation but may be used with existing hardwood floors. Other applications include wall or ceiling installations where a flush surface is required. Each grille is 3/4" thick with a rail that is 1" wide with straight edges and no undercut. Blades can run long direction, straight or angled, or short direction in 2-way or 3-way diffusion. These supply air vents are also available in 1" x 1.5" on center rectangles, 1" x 1" on center squares, and 1.5" x 1.5" on center squares. Custom thicknesses and sizes available upon request.

Duct   Size

2-1/4″   x 10″

2-1/4″   x 12″

2-1/4″   x 14″

3″   x 10″

3″   x 12″

3″   x 14″

4″   x 8″

4″   x 10 “

4″   x 12″

4″   x 14″

6″   x 10″

6″   x 12″

6″   x 14″

6″   x 30″

8″   x 10″

8″   x 12″

8″   x 14″

Flush   Mount
  (Overall outside dimension)

5″   x 12-7/16″

5″   x 14-7/16″

5″   x 16-7/16″

5-3/4″   x 12-7/16″

5-3/4″   x 14-7/16″

5-3/4″   x 16-7/16″

6-3/4″   x 10-7/16″

6-3/4″   x 12-7/16″

6-3/4″   x 14-7/16″

6-3/4″   x 16-7/16″

8-3/4″   x 12-7/16″

8-3/4″   x 14-7/16″

8-3/4″   x 16-7/16″

8-3/4″   x 32-3/4″

10-3/4″   x 12-7/16″

10-3/4″   x 14-7/16″

10-3/4″   x 16-7/16″